Expert Answers about GMC RV Leveling Blocks

• Can FasTen RV Leveling Blocks be Used Under RV Wheels and Landing Gear/Jacks
• Yes, you can use the FasTen RV leveling blocks # CAM44525 under the wheels of the RV or under its landing gear/jacks. The landing gear or jacks will need to have a foot plate to sit properly on these blocks. The maximum height for use is 4-1/2 inches for these blocks. I have linked a video review of these blocks for you.
  view full answer...


• Can FasTen RV Leveling Blocks # CAM44512 be Used Under Stabilizer Jacks
• Yes! You certainly can use the FasTen RV Leveling Blocks # CAM44512 under stabilizer jacks. They are made to work with jacks, stabilizers, or trailer wheels. I have linked a video review of the blocks for you.
  view full answer...


• Do Camco FasTen Leveling RV Blocks Have Weight Capacity
• I confirmed with Camco that their FasTen RV Leveling Blocks # CAM44521 do not carry a maximum RV weight rating so they are compatible with virtually any RV or motorhome out there. This set is gray and the part # CAM44512 is yellow.
  view full answer...


• Will Stackers Wheel Chock Work with Camco Leveling Blocks
• Because of how the blocks connect to each other, the Stackers Wheel Chock # A10-0922 referenced in your question will not be compatible with the FasTen RV Leveling Blocks # CAM44512. I have attached a couple of images that clarify the mounting pattern for each style block so you can get a better idea as to why they will not connect to each other. To use the Stackers Wheel Chock along with stacking blocks, you will need the Stackers Leveling Blocks # A10-0918, which comes with a quantity...
  view full answer...


• Compatibility Of Multiple Jack Foot Pads And Blocks
• Yes, you could use the Stromberg Carlson RV Jack Pads for RVs and Trailers - 14" Long x 12" Wide - Rubber - Qty 2 # SC57VR along with Andersen's Jack Block or with the Stromberg Carlson Base Pad Extreme for RVs and Trailers - 6,000lbs - Qty 4 # SC53VR. The # SC57VR has 14" x 12" dimensions so you would want to place these on the ground and then the Andersen or Stromberg Jack Blocks on top to have your Lippert 9" jack feet to sit on. If you wanted SnapPads as well to leave on the jack...
  view full answer...


• Can Fastway ONEstep Wheel Chocks be Used With Leveling Blocks
• That's a really good question, and while it may be technically possible to use the Fastway ONEstep Wheel Chocks for Tandem-Axle Trailers and RVs # FA84-00-4840 with blocks like the Ultra-Fab Leveling Blocks # UF48-979051, the issue is going to be how the ONEstep sets up. You could set up the wheel chocks, and with them staggered put the ONEstep in between them, but blocks like the Ultra-Fab # UF48-979051 are designed for the tires to grip them, and since they aren't flat on the surface...
  view full answer...


• How to Chock Tandem Axle Trailer While Using Leveling Blocks
• The FasTen RV Leveling Blocks w/ Carrying Handle # CAM44512 can definitely be used to help jack up your travel trailer but then you'll want to add some chocks like part # FHG97ZR on either side of your tires to help ensure your trailer won't start rolling. Attached is a review video of the stabilizers for you to check out!
  view full answer...


• Can Andersen Camper Wheel Chock and Leveler AM3604 be Used if More than 4 Inches Off Level
• If you are more than 4 inches off level then you would still be off level when using Andersen Camper Wheel Chock and Leveler Item # AM3604 just to a lesser degree. So if you are 5 inches off, use this leveler, you will still be 1 inch from being level. You can still use it you just won't be level. What I recommend is to also have some leveling blocks such as # UF48-979051. These are stackable blocks so you can adjust how many are used for the best height to level the trailer/RV. If you...
  view full answer...


• Recommended Wheel Chocks To Go With An Andersen Rapid Jack
• The Fastway ONEstep Wheel Chocks for Tandem-Axle Trailers and RVs - 16" to 24" Long - Qty 2 Item # FA84-00-4840 has an adjustable length so you could use them on top of a block but the wheels would need to be level with each other for the # FA84-00-4840 to get a proper fit against the tires. Since you would only be able to use the Andersen Rapid Jack Item # AM3620 on one tire they would sit unevenly from each other and the # FA84-00-4840 wouldn't have good contact with the tires. You'd...
  view full answer...


• Will the Lippert Components 5th Wheel RV Landing Gear Foot Pad LC314667 Fit My Landing Gear Legs
• The Lippert Components 5th Wheel RV Landing Gear Foot Pad part # LC314667 is designed for the Lippert Ground Control 2.0 Electric Leveling System. The Lippert Components 5th Wheel RV Landing Gear Foot Pad part # LC362486 is designed for the Lippert Ground Control 3.0 Electric Leveling System. If you did have a Lippert Ground Control Electric Leveling System then most likely it would be the 3.0 and not the 2.0 therefore the Lippert Components 5th Wheel RV Landing Gear Foot Pad part # LC362486...
  view full answer...


• Manual Stabilizing Jacks For Class C Motorhome
• These manual scissors jacks are for stabilization and not for leveling, so if you want to level out your Class C Winnebago Vita motorhome then you will need leveling blocks, the Ultra-Fab Leveling Blocks for Trailers and RVs # UF48-979051. Then for stabilizing jacks, ground clearance should not be an issue, no, and what you will need depends on the distance from your frame to the ground. The Stromberg Carlson Scissor Jacks have a 5,000 lb capacity per jack and each has a retracted height...
  view full answer...


• Using SnapPad Jack Pads On An Andersen Block
• As long as your Andersen Blocks are 9" in diameter and have a lip of around 1/8" you should be fine using the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet - Qty 4 Item # SP54FR4. If you have issues keeping them attached SnapPad also recommends using 1/4" thick bolts with nylon nuts to bolt the SnapPads to jack feet so you could do the same with the blocks.
  view full answer...


• Levelers Compatible With The Front Wheels on a 2020 Jayco Redhawk 24B Motorhome
• While the Andersen Rapid Jack # AM3620 would work for what you are wanting I recommend going with the Stromberg Carlson Base Pad RV Levelers # SC76MR instead. These have a wedge that will help hole the front wheel in place.
  view full answer...


• Compatibility of the Ultra-Fab Chock and Lock Wheel Stabilizers on Tandem Axle Trailer
• Since you are using blocks under the tires of your trailer when leveling, then the Ultra-Fab Chock and Lock Wheel Stabilizers, # UF21-001060, will work well for your application. The Ultra-Fab stabilizers will fit between the wheels of your axles and will eliminate the give between your axles. The chocks E-Z grip handle allows you to expand the stabilizer and can be lock using a pad lock to deter theft.
  view full answer...


• Do The OE Steps Need To Be Removed To Install Lippert SolidStep RV Steps # LC713662?
• You do not have to remove the factory folding steps to install the Lippert SolidStep RV Steps # LC713662. We do have the MORryde Locking RV Storage Box # MR43RR if you want to replace them with something you will be able to use. I find this is a great place to store wheel chocks, landing pads and levelers which you need before the steps are folded down and block the storage box.
  view full answer...


• How To Choose the Correct Trailer Scissor Stabilizer Jacks for an RV
• It sounds like you might be trying to pick out a set of stabilizer jacks for your trailer. If that is the case then what you will want to do is park your trailer on flat-level ground and then level it. Once this is done you can then measure from the ground to the bottom of the frame where the stabilizer jacks will mount. If this distance does not exceed 18-3/4" then you can use the Scissor Stabilizer Jacks w/ Handle part # TJSCHD-24. If this distance does exceed 18-3/4" then you can add...
  view full answer...


• Do You Need To Use A Base Pad For Every Stabilizer On Your Trailer
• You would not need to use a Stromberg Carlson Base Pad Extreme for RVs and Trailers # SC33VR on each stabilizer but it is recommended. Speaking from experience, there are a lot of awkward camp sites where one end of your 2021 Keystone Avalanche may be too close to the ground to comfortably fit a full size base pad like these while the opposite side could have a drop off that requires more than one block. These pads are going to help prevent you from having to fully deploy your stabilizers...
  view full answer...


• Can 2 or More Andersen Camper Levelers be Used on the Same Side of a Triple Axle Trailer
• Because of the travel of the suspension on a trailer, using just one leveler, # AM3604, would not provide enough lift in most circumstances. It would be difficult to use more than one per side on a triple axle trailer so I recommend going with a different type of leveler. Take a look at the Ultra-Fab Levelers, # UF48-979051. These 10 levelers can be stacked as needed and the space between tires of multiple axle trailers should not be an issue. With a triple axle trailer though a 10-pack...
  view full answer...


• How to Lift the Front of an RV on a 2010 Ford F-350 Chassis
• I do have an option to help you lift the front of your RV on a 2010 Ford F-350 chassis but nothing for the rear. For the front, I recommend using the SuperCoils Custom Suspension Coils part # SSC-30. The SuperCoils will lift the front of your E-350 approximately 2". They have a 3,395 lbs weight capacity and come with a 3 year warranty. None of the SumoSprings would raise the ride height of the vehicle. For the rear you would want to look into a lift block that go between the leaf spring...
  view full answer...


• Can the RoadActive Suspension RAS3611-Y Fit a 2011 F-150 With Leveling Blocks Installed?
• As the RoadActive Suspension Custom Leaf Spring Enhancement Kit # RAS3611-Y will attach to the top of your leaf springs and your leveling blocks are installed under your leaf springs, there will no issues installing these. However, I do need to say that the # RAS3611-Y is designed for use with a 4 wheel drive 2011 F-150, so if you have a 2 wheel drive model, you will need the # RAS3611.
  view full answer...